Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8188893
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | AB water supply, PU glue, PU foam material, hand inkpad, palm materials, hand-mud |
Published: | 2011-02-26 |
Validity: | 365 |
Specifications: | AB water, PU adhesive, PU foam materials, hand inks, prototype materials, hand-mud |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | AB water supply, PU glue, PU foam material, hand inkpad, palm materials, hand-mud First, chemical name: Rapid Prototyping plastic chemicals common name or trade name: AB water or PU glue Second, the use (1) Measurement A liquid, B liquid mixed with all the weight ratio: 1:1. Using paper cups or other containers, said first A proper amount of liquid, and then use another paper or other container weighed with the weight of liquid B. Please accurate weighing , A quantity of liquid and B liquid consistency. If the weight deviation is too large, may cause the surface can not be completely cured cure \, or the color of cured deviations occur. (2) Mixed The main method is accurate to say the B liquid into the A solution, and then use the metal spatula or glass rod to mix. If mixing uneven surfaces may cause can not be completely cured cure \, or to place the color of cured deviation. Note: mixing time of 10 ~ 20 seconds is appropriate, because of A liquid and B liquid mixture in the 1.5 to 2 minutes, curing, so the sooner the better hours of operation. (3) irrigation mode , Stir, and rapidly poured into the silicone mold, a vacuum machine, vacuum machine can be deprived of the liquid into the water and air, vacuum can be obtained after the contraction of the small, nonporous beautiful products. (4) Stripping After vacuum extraction was complete, the irrigation water is a good AB silicone mold place the flat bench, to be 10 to 20 minutes, you can mold release, the curing reaction heat curing temperature will rise, please note that to avoid scalding accidents, if too early ejection, due to the chilling temperature of curing may be deformed. Model: 8015AB water, 8012AB water, 8014AB water, 8017AB water Packaging: 2kg / group Fimo clay production technology, Taiwan Blackhand brand washing powder production technology, (colored sludge, sludge ash sculpture, mold clay) technology transfer / training " Mobile: 13112812818 Advisory QQ: 78579399 Address Taobao: http://shop36418698.taobao.com |
Admin>>>
You are the 11120 visitor
Copyright © GuangDong ICP No. 10089450, Sculpture Material Factory Dongguan City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 11120 visitor
Copyright © GuangDong ICP No. 10089450, Sculpture Material Factory Dongguan City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility